Load Calibration With Impedance Probe (Load Cal 001); Required Equipment; Procedure; Setup For Load Calibration With Impedance Probe - Agilent Technologies E4915A Service Manual

14. Load Calibration with Impedance Probe (LOAD CAL 001)

Required Equipment

Impedance Probe Kit E4916A Opt.001

Procedure

1. Connect the equipment as shown in Figure 2-16.
Figure 2-16. Setup for Load Calibration with Impedance Probe
2. Select \LOAD CAL 001" and click
NNNNNNNN
OK in the list box of the program display.
3. Following the program instructions, complete the procedure.
Adjustments and Performance Tests 2-23