Ordering Information; Direct Mail Order System - Agilent Technologies E4915A Service Manual

Ordering Information

To order a part listed in the replaceable parts table, quote the Agilent Technologies part number
(with a check digit), indicate the quantity required, and address the order to the nearest
Agilent Technologies oce. The check digit will ensure accurate and timely processing of the
order.
To order a part that not listed in the replaceable parts table, include the instrument model
number, the description and function of the part, and the quantity of parts required. Address
to order to the nearest Agilent Technologies oce.

Direct Mail Order System

Within the USA, Agilent Technologies can supply parts through a direct mail order system.
Advantages of using this system are:
1. Direct ordering and shipment from the Agilent Technologies Parts Center in Mountain View,
California.
2. No maximum or minimum on any mail order (there is a minimum order amount for parts
ordered through a local Agilent Technologies oce when the orders require billing and
invoicing).
3. Prepaid transportation (there is a small handling charge for each order).
4. No invoices.
To provide these advantages, a check or money order must accompany each order.
Mail order forms and speci c ordering information are available through your local Agilent
Technologies oce, addresses and phone numbers are located at the back of this manual.
A : assembly
B : motor
BT : battery
C : capacitor
CP : coupler
CR : diode
DL : delay line
DS : device signaling (lamp)
E : misc electronic part
F : fuse
FL : lter
J : jack
K : relay
L : inductor
M : meter
4-2 Replaceable Parts
Table 4-2. List of Reference Designators
MP : mechanical part
P : plug
Q : transistor
R : resistor
RT : thermistor
S : switch
T : transformer
TB : terminal board
TP : test point
U : integrated circuit
V : vacuum, tube, neon bulb, photocell, etc.
VR : voltage regulator
W : cable
X : socket
Y : crystal