SAfETy INfORmATION
Declarations of Conformity
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27
Maintenance and repair
In general, maintenance and repair is to be carried out with the magazine turned
off. The main switch must be locked out. In a few cases, maintenance and repair
need to be performed with the magazine turned on (e.g., replacement of backup
batteries). These activities must be carried out with special care.
Even when the main switch is switched off, parts of the magazine (e.g., the
control cabinet light) may still carry electricity. These parts are labelled.
• Apart from that, the instructions in document "Safety instructions for CNC turn-
ing machines" must be observed.
Storage and decommissioning
Refer to document "Safety instructions for CNC turning machines", please.
Disposal
Refer to document "Safety instructions for CNC turning machines", please.
Product monitoring
Refer to document "Safety instructions for CNC turning machines", please.
Declarations of Conformity
Refer to document "Safety instructions for CNC turning machines", please.
25