OPERATING
Loading of bars
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27
Loading of bars
Bar loading is best from cycles "Operate magazine" and "Bar loading".
Loading the magazine by means of the rack loader unit
The user loads bars into the rack loader unit and stockpiles them there.
For the loading of the rack loader unit, loading must in the first instance be re-
quired.
• For this purpose press key ② "REQUEST LOADING" at the rear face of the
loading magazine.
As soon as loading may happen, the key is glowing.
Attention:
If the key is flashing, the bar loading magazine is in a work
cycle. If the light curtain is interrupted during said cycle, any
motions will be stopped.
Depending on the position of the individual actors, you have to
enable the units.
2
3
61