Table of Contents
Advertisement
OPERATING
Handheld Terminal Keba KeTop T20
JOG
INC
POS
Z -
Z +
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27
Z axis of the spot‑drilling unit
Function mode JOG - The Z axis can be moved forward or backward via the Z+/Z-
key
Function mode INC - The Z axis can be moved forward or backward in increments
via the Z+/Z- key
Function mode POS - The Z axis can be positioned via the Z+/Z- key
Key Z–: In the selected function mode, the Z axis can be moved leftward
Key Z+: In the selected function mode, the Z axis can be moved rightward
Spot‑drilling unit drill
Drill: clockwise run - The drill of the spot-drilling unit rotates clockwise
Drill: counter-clockwise run - The drill of the spot-drilling unit rotates counter-clock-
wise
Stop drill - The drill of the spot-drilling unit stops
Drill lubrication system ON - The drill lubrication system is switched-ON
Drill lubrication system OFF - The drill lubrication system is switched-OFF
47
Advertisement
Table of Contents
