Maintenance Summary - Care Activities - Index B400 Operating Instructions Manual

Maintenance Summary - Care activities

It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number DIE151EN - 15.08.2022.
The maintenance interval is highly dependent on the production and environmental conditions of the
machine. The determination of the appropriate interval must be made by the operator.
The maintenance interval should be between once per shift and once a week!
A010 - Check the work area door and window pane
A023 - Check hydraulic system (visual inspection)
A027 - Replace the breathing filter at the filler neck of the hydraulic fluid tank.
A043 - Check pneumatic system (visual inspection)
A048 - Check the lubrication system (visual inspection)
A070 - Check filter on air conditioner cooling fan
A080 - Clean and lubricate clamping device
A090 - Check electrical lines (visual inspection)
A095 - Visual inspection of all fluid lines and electrical cables
A097 - Clean cooling lubricant outlet on clamping cylinder
A120 - Check cooling lubricant (visual inspection)
A132 - Check work area light (visual inspection)
A210 - Check hydraulic shock absorbers and rubber pads on the telescopic plates
A267 - Clean the chip conveyor
6
Maintenance Summary - Care activities
Maintenance Instructions
DIE150EN - 15.08.2022
B400 B500