Table of Contents
Advertisement
SET-UP
Spot-drilling unit
86
Discharging of the chip container
• For discharging of the chip container open the rear door which gives access to
the spot-drilling unit.
• In additions, like with request of loading, press key ② "REQUIRE LOADING".
• As soon as the key is glowing, the door may be opened.
Attention:
In case the key is flashing, the bar loading magazine is in a
spot drilling cycle. In such case, the door remains locked until
the cycle is completed.
• Now, you can withdraw and discharge the chip container.
While the door is open, no further spot-drilling cycle can be started.
• After discharging of the chip container, re-position it beneath the chip chute.
When discharging the chip container, you must use your per‑
sonal safety equipment. Refer to safety instructions, please.
You ought to select a counter setting with reference to the
anticipated weight of the chip container with chips in it.
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
2
DIM063EN - 2021-09-27
Advertisement
Table of Contents
