Table of Contents
Advertisement
OPERATING
Start pre-conditions
68
Loading bars in case of a magazine with bundle
loading unit
②
• Press key
"REQUEST LOADING". The key starts flashing.
1 EMERGENCY OFF
2 REQUEST LOADING
3 RESET LIGHT CURTAIN
• Maybe complete sub-process "Convey bar", thereafter, start "Hoisting sling
downward".
• Complete other sub-processes (spot-drilling, loading cycle)
• If the hoisting sling is in the very bottom position and if all other sub-processes
are completed, the light of key
ing. This indicates, that the light curtains may be interrupted for loading purpos-
es without affecting any other processes.
• Loading of the bar bundle into the bundle loading unit (see section "Loading"),
automatic switch-OFF of the release circuits.
After interruption of the light curtains, the lamp of key ③ RESET LIGHT CUR-
TAIN is beaming.
• After completion of loading and regional release of the light curtain, press key
③ RESET LIGHT CURTAIN: Thereby, you re-activate the release circuits and
the continuation of any other sub-processes.
②
• Maybe press key
REQUEST LOADING a second time. The light extinguish-
es, the bundle is lifted up, until a bar approaches the separating unit.
• In case you do not press the key a second time, it continues beaming until the
bundle is being re-assumed by the other process.
②
"REQUEST LOADING" will be steadily burn-
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
3
1
2
DIM063EN - 2021-09-27
Advertisement
Table of Contents
