Maintenance Summary - Care Activities - Index G220 Operating Instructions And Maintenance Instructions

Maintenance Summary - Care activities

It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number DIE018EN - 05.06.2019.
The maintenance interval is highly dependent on the production and environmental conditions of the
machine. The determination of the appropriate interval must be made by the operator.
The maintenance interval should be between once per shift and once a week!
A010 - Check work area door and viewing glass
A025 - Check hydraulic system (visual inspection)
A037 - Check pneumatic system (visual inspection)
A075 - Checking fill levels of the fluid tanks
A080 - Clean and lubricate clamping device
A090 - Check electrical lines (visual inspection)
A095 - Visual inspection of all fluid lines and electrical cables
A097 - Clean cooling lubricant outlet on clamping cylinder
A110 - Clean filter screens on chip conveyor
A120 - Check cooling lubricant (visual inspection)
A124 - Check the cooling unit and the coolant
A130 - Check work area light (visual inspection)
A180 - Clean the work area
A265 - Cleaning the chip conveyor
A280 - Clean labyrinth ring of spindles
A320 - Wassermann tool change system
6
Maintenance Summary - Care activities
Maintenance Instructions
DIE017EN - 05.06.2019
G220