Drilling Tools; Change Drill - Index MBL22-8 Series Operating Instructions Manual

SET-UP
Spot-drilling unit
Z - Z +
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27

Drilling tools

For drillings with a diameter of 15 mm, it is standard to use a throwaway tip drill
KUB Trigon (INDEX article number 904990.1061) with the respective throwaway
tips (INDEX article number 904990.1081).
The length of the drill is 70 mm and must be entered in the user settings.
For drillings with a diameter of 8 mm, it is provided to use a solid carbide drill Titex
(INDEX article number 904990.1071). The length of the drill is approx. 55 mm and
must be entered in the user settings.
For varying tools, please contact INDEX and clarify.

Change drill

• If you want to change the drill of the spot-drilling unit, first of all move Z axis
away from the drill. A position at a distance of 145 mms is sufficient.
• Thereafter, open the door. Concerning this, please refer to "Adjustment of the
lifting stroke height" further above in the present document.
• By rotating the locking bar
the area for drill change is exposed.
①
, you may open the flap at the chip chute whereby
①
83