Table of Contents
Advertisement
Maintenance Summary - Care activities
It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number DIE220EN - 05.06.2019.
The maintenance interval is highly dependent on the production and environmental conditions of the
machine. The determination of the appropriate interval must be made by the operator.
The maintenance interval should be between once per shift and once a week!
A010
- Check work area door and viewing glass
A023
- Check hydraulic system (visual inspection)
A043
- Check pneumatic system (visual inspection)
A048
- Check the lubrication system (visual inspection)
A070
- Check filter on air conditioner cooling fan
A080
- Clean and lubricate clamping device
A090
- Check electrical lines (visual inspection)
A095
- Visual inspection of all fluid lines and electrical cables
A097
- Clean cooling lubricant outlet on clamping cylinder
A120
- Check cooling lubricant (visual inspection)
A130
- Check work area light (visual inspection)
A210
- Check hydraulic shock absorbers and rubber pads on the telescopic plates
A267
- Cleaning the chip conveyor
6
Maintenance Summary - Care activities
Maintenance Instructions
DIE219EN - 05.06.2019
B500
Advertisement
Table of Contents
