SAfETy INfORmATION
General safety information
Spot-drilling unit
16
Safety functions and equipment
Refer to document "Safety instructions for CNC turning machines", please.
Work area enclosure and work area door
Refer to document "Safety instructions for CNC turning machines", please.
Pressure tanks
Refer to document "Safety instructions for CNC turning machines", please.
Electrical energy
Refer to document "Safety instructions for CNC turning machines", please.
Operating fluids and additives
Refer to document "Safety instructions for CNC turning machines", please.
Inadmissible emissions (of gases, powders, oil mists) may happen at the spot-drill-
ing unit. For this reason, the spot-drilling unit must be connected to the exhaust
equipment of the machine.
In so doing, you must use the connecting element for the defined interface of the
exhaust equipment.
IT and data security
Refer to document "Safety instructions for CNC turning machines", please.
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27