Table of Contents
Advertisement
SET-UP
Spot-drilling unit
76
Spot‑drilling unit
The spot-drilling unit serves the spot drilling of material bars which are intended for
the internal clamping sleeve of the slider.
Adjustment of the lifting stroke height
In case a bar is present at the stopper of the lifting unit, said bar is lifted up at this
position by the spot-drilling unit. Depending on the diameter of the bar, the lifting
stroke height must be adjusted in such a way that the bar can always be posi-
tioned centrically with reference to the lifting unit.
• For the adjustment of the lifting stroke height, open the rear door giving access
to the spot-drilling unit. For this purpose, like with loading request, press key ②
"REQUEST LOADING"
As soon as door can be opened, the above key will be glowing.
Attention:
In case the key is flashing, the loading magazine is in a
spot‑drilling cycle. In this case, the door remains locked until
the cycle is completed
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
2
DIM063EN - 2021-09-27
Advertisement
Table of Contents
