UltraGlide Wiring Kit (P/N 117-0137-024)
TABLE 4.
Picture
Install the UltraGlide Hydraulic System
Manual No. 016-0230-081
Item Description
Cable - Sensor
Cable - Harness
Cable - Power/CAN Controller
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
Part Number
115-0171-527
115-0230-045
115-0230-007
WARNING
CAUTION
UltraGlide
Qty.
2
1
1
29