Chapter 4
Install the UltraGlide Hydraulic System
Convert the Sprayer's Hydraulic Valve to Open Center (If
Applicable)
By factory default, the machine's main hydraulic valve is configured as a "closed center" hydraulic system. In
order for AutoBoom to function properly and to prevent the hydraulic system from overheating, Raven
recommends converting the machine's hydraulic system to an "open center" system.
Note:
Contact your Bestway dealer to obtain the open center conversion kit.
32
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Bestway 2009 & Newer AutoBoom Installation Manual