Table of Contents
Advertisement
C
5
HAPTER
TABLE 6. Gen II UltraGlide Wiring Kit (P/N 117-5130-003)
Picture
INSTALL THE ULTRAGLIDE HYDRAULIC SYSTEM
48
Item Description
Cable - Sensor
Cable - PowerGlide Plus/UltraGlide with
CAN/Power Tee AutoBoom
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
The appearance of the AutoBoom hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fast 9600 - 80'-120' Booms AutoBoom Installation Manual
Part Number
115-0171-527
115-0230-085
WARNING
CAUTION
NOTICE
Qty.
2
1
Advertisement
Table of Contents
