Table of Contents
Advertisement
CHAPTER
3
INSTALL THE HYDRAULIC SYSTEM
FIGURE 1. Hydraulic Valve Installed
1. Install the hydraulic valve mounting bracket to the Steerable Hitch tongue using the supplied hardware.
2. Mount the Steerable Hitch hydraulic valve (P/N 063-0131-130) on the valve mounting bracket using the
supplied hardware.
FIGURE 2. Machine's Selective Control Valve
3. Install a hydraulic hose in the pressure port of the machine's selective control valve.
4. Route a new pressure hose from the machine's selective control valve and connect it to Port P of the Steerable
Hitch valve.
5. Install a hydraulic hose in the tank port of the machine's selective control valve.
P/N 016-4001-133 Rev. B
S TEERABLE HITCH
C H A P T E R 3
COMPONENT INSTALLATION
11
Advertisement
Table of Contents
