How To Change Device Tag Name; How To Use Remote Antenna; Figure 33: Example Of Remote Antenna Assembly - ABB GW100 User Manual

G OO D TO K N OW
9. Once deleted, turn on new device to join network. If the device is already configured
with same device tag then simply proceed to step 5. Else, you can use either the
HART handheld, ABB FIM or AWIN WIrelessHART Gateways Configurator to change
tag name. Refer to their user manual for details.
10. Afterwards, go to Modbus Configuration page, select Manual mode and import the
Modbus map saved in Step1.
Note: The device's Long Tag can be changed at any time via the IO Schedule.
9.4

How to Change Device Tag Name?

The long tag of a device can be changed by using HART handheld, ABB FIM and AWIN Wire-
lessHART Gateways Configurator.
Refer to the user manual of these products for detail procedure. For using AWIN Gateways
WirelessHART Configurator refer to document number 3BNP102911.
9.5

How to Use Remote Antenna?

In general, for non- hazardous area deployments, a standard 2.4GHz antenna can be used. Re-
fer to the antenna user manual for details.
As an example, see the following illustration for remote antenna connectivity with AWIN
GW100 rev.2.
3B NP 10299 2 B

Figure 33: Example of remote antenna assembly

HO W TO CHA NGE DEVI CE TAG NAME ?
5 7