Printing Materials
Available
Materials
Printer Model
Vero (colors)
Objet30 Pro
Objet30
Objet30 Scholar
Objet30 OrthoDesk
DOC-24333 Rev. A
Objet printers produce models by jetting thin layers of printing materials
on the build tray, until the complete model is formed. Two types of material
are used in this process:
•
Model material—which makes up the finished model
•
Support material—which fills gaps and spaces in the model during
printing, and is removed after printing
Different types of Model materials are available for Objet30‐series printers,
depending on the printer model.
VeroClear Durus RGD525 RGD450 RGD240 MED610 MED690
•
Vero
Materials in this group are suitable for general model making, and come
in a choice of color (white, blue, gray, black and VeroClear™).
All of these materials offer the following features:
thermo‐plastics simulation (appearance and feel)
high dimensional stability (especially with VeroGray™,
VeroWhitePlus™, VeroBlackPlus™ and VeroClear)
excellent detail and surface quality
•
VeroClear™
VeroClear, available for Objet30‐Pro printers only, is a transparent
material simulating PMMA. Its characteristics are the same as other
Vero materials.
•
Durus
DurusWhite™ is available, which features:
polypropylene simulation (appearance and feel)
enhanced toughness and flexibility—suitable for reusable containers
and other snap‐fit applications
•
RGD525
RGD525™ is an off‐white material, which features:
excellent heat resistance (up to 80° C)—parts retain their shape, even
in extreme conditions
high durability
fine surface finish
long shelf life
Objet30 User Guide
3–5