Automatic Placement - Stratasys Objet30 User Manual

Automatic
Placement
DOC-24333 Rev. A
After placing several objects on the build tray, you can let Objet Studio
arrange them on the tray for printing. This ensures that the objects are
positioned properly, and that they will be printed in the shortest time and
with a minimum of material.
To automatically arrange objects on the build tray:
On the Tray Settings ribbon, click
or—
From the Tools menu, select
The effects of automatic positioning are shown in the figures below.
Figure 5-20: Tray before objects are properly arranged
Figure 5-21: Tray arrangement when applying automatic placement
•
For best results arrange the tray with Automatic Placement, on the Tray
Settings ribbon, even if you inserted the objects with the Orient
Automatically option.
•
The physical characteristics of each type of model material you use can
affect the positioning of objects on the build tray. Therefore, select the
material before running Automatic Placement.
.
.

Automatic Placement

Objet30 User Guide
5–19