Printing Indicators - Stratasys Objet30 User Manual

Printing
Indicators
Printer mode
Job information
Stop button
Pause button
DOC-24333 Rev. A
The printer interface screen changes when you send a print job from Objet
Studio to the printer, and the printer is on line (see figure 6‐8):
•
The mode changes from Pre‐print to Printing.
•
The specific activity being performed is shown in the "current activity"
field.
•
Current job‐printing information is displayed.
•
The printing progress bar is displayed.
•
The Stop and Pause buttons are enabled.
Figure 6-8: Printer interface during printing
Objet30 User Guide
Current Activity
Job information
Progress bar
Distributed
pumping
Almost empty
6–9