About This Guide
Using This Guide
For More Information
1–2
This user guide provides instructions for installing, operating and
maintaining Objet 3D printing systems. It explains how to use features, and
provides practical examples to guide you as you use the system.
This document is meant to be used with Objet30 3D printers, running
software version 30.2.1, and with Objet Studio software version 9.2.
This guide assumes that:
•
all the hardware, software, and network components of your Objet
system are installed, configured, and operating correctly.
•
the operator has a working knowledge of the Windows
Visit http://www.stratasys.com/ for more details about Objet printer
technology, products and consumables, and for service and support
contacts.
For other documents that relate to Objet30 3‐D printing systems, and for
this document in other languages, contact your regional Stratasys
Customer Support office.
If you have any questions about the information presented in this
document, or if you have any comments or suggestions for future editions,
please send a message to c‐support@stratasys.com.
®
PC platform.
DOC-24333 Rev. A