Procedure To Cancel The Setting; Restricted Settings - Canon imageRUNNER ADVANCE System V3.13 Service Manual

2. Check if [RESTRICTED MODE] is displayed on the top screen.
■ Procedure to Check in the [Settings/Registration] Menu
Follow the procedure show below to check in the [Settings/Registrations] menu whether or not the Restrict Service Representative
Access setting is enabled.
1. Start the remote UI as a system administrator user.
2. Check the following setting.
• [Settings/Registrations] > [Management Settings] > [Device Management] > [Settings for Service Representative
Access Restriction]
• Restrict: The service mode function is restricted.
• Do Not Restrict After Authentication: The service mode function is restricted, but is not restricted after authentication
is performed.
• Do Not Restrict: The service mode function is not restricted.

Procedure to Cancel the Setting

Follow the procedure show below to cancel the restriction on service representative access.
1. Start remote UI as a user with administrator privileges.
2. Set the following parameter to [Do Not Restrict].
• [Settings/Registrations] > [Management Settings] > [Device Management] > [Settings for Service Representative
Access Restriction]

Restricted Settings

The following settings are restricted when this function is enabled.
29
3. Security Function