Canon imageRUNNER ADVANCE System V3.13 Service Manual page 59

4. Press [Yes].
Retrieve from the distribution server download file data for communication test (communication test with the distribution
server).
The download file data for communication test allows to download a test content from the file server (communication test
with the file server).
5. When the communication test is complete, its result screen appears.
Press [OK] to complete this operation.
CAUTION:
Make sure to perform a communication test for both Embedded RDS and Software Distribution(CDS).
■ Enabling Remote Monitoring Server Link
Target methods
If updating firmware using one of the following methods, the service technician must first enable the link with Remote Monitoring
Server.
• a. Software Distribution(CDS) Remote Update
• b. Software Distribution(CDS) Remote Download
Work Description
Set the following service mode to 1.
• COPIER > Option > FNC-SW > CDS-UGW
Set the following setting to "Yes."
• Remote Monitoring Server WebPortal settings > Firmware Distribution on the [Customer Management] screen
54
4. Firmware Management