Table of Contents
Advertisement
• PRINT
• FAX
• I-FAX
• Report Print
• SEND
However, under the following conditions, the job is interrupted and the firmware update process is performed.
• During reception of I-FAX
• During transmission of SEND or during waiting for transmission ("forward" is included in both cases)
When firmware update is executed and the job is not completed within 10 minutes, the firmware update is stopped. In that case,
the error code 8x001106 ("x" varies depending on the execution mode) is displayed.
If these jobs do not exist, the firmware update process is performed.
Restart of the device at firmware update complies with the device shutdown sequence.
Performing the communication test again
Communication test must be performed again after the following procedures. Updater function does not operate properly until a
communication test is not performed.
• When the FLASH PCB is replaced.
• When the following menu of the Service Mode is executed.
COPIER >Function > CLEAR > MN-CON
• When the following menu is executed.
[Settings/Registration] > [Management Settings] > [Data Management] > [Initialize All Data/Settings]
Preparation
The following preparations are required to update firmware using Updater.
Distribution name
Updates performed by service technicians
a. Software Distribu-
tion(CDS) Remote Update
b. Software Distribu-
tion(CDS) Remote Down-
load
c. Software Distribu-
tion(CDS) On-Site Down-
load
d. Software Distribu-
tion(CDS) Scheduled Up-
date
e. Software Distribu-
tion(CDS) USB Update
f. Local CDS Update
Updates performed by users
Software Distribution(CDS)
on-site download method by
local UI
Software Distribution(CDS)
on-site download method by
remote UI
Special download and up-
date using remote UI
*1: Required when configuring the scheduled update setting on the Control Panel.
Settings of
Network
Vice-Com-
settings
pany of
Sales
-
-
-
-
-
Enabling
Enabling
Remote
[Update
Monitoring
Firmware]
Server link
button on
[Settings/
Registra-
tion] menu
-
-
-
-
-
-
-
-
-
-
-
-
50
4. Firmware Management
Enabling
Enabling
[Manual Up-
scheduled
date] button
updates
on remote UI
(*1)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Enabling
Local CDS
button
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
Troubleshooting
