Setting Procedure; Procedure To Confirm The Settings - Canon imageRUNNER ADVANCE System V3.13 Service Manual

Setting Procedure

Follow the procedure shown below to configure the settings of this function.
1. Log in using an account with administrator privileges.
2. Access the following menu, and configure the settings.
• [Settings/Registration] > [Management Settings] > [Device Management] > [Restrict Service Representative Access]
ON: Restrict
The settings related to user assets in service mode can no longer be configured/executed. Even if a target item is
selected, the "OK" button remains disabled and cannot be pressed.
OFF (Authentication is required.)
The settings related to user assets in service mode can be configured/executed by performing user authentication
before accessing the service mode. Before performing user authentication, the state of the screen is the same with that
of the screen with access restricted (this function enabled), i.e. the button is disabled.
OFF: Allow
All the items in service mode can be executed. (Operation is available as before.)

Procedure to Confirm the Settings

Follow the procedure shown below to check whether this function is enabled.
■ Procedure for Checking in Service Mode
Follow the procedure shown below to check in service mode whether or not the Restrict Service Representative Access setting
is enabled.
1. Enter service mode.
Access after authentication
All settings can be changed.
Access without authentication
Settings related to information on
user assets cannot be changed.
28
3. Security Function