Canon imageRUNNER ADVANCE System V3.13 Service Manual page 62

• Example of the Updater screen when the [Update Firmware] button is disabled (setting value: "0")
● Enable [Install Applications/Options] button
By changing the following service mode, whether or not to display the button for installing applications for users (MEAP application,
system option, etc.) in the [Settings/Registration] menu can be set. Set the value to "0" to hide the button, or "1" to display it.
COPIER >OPTION >FNC-SW >CDS-MEAP
• Example of the Updater screen when the setting is "1" (enabled)
• Example of the Updater screen when the setting is "0" (disabled)
● Enabling the [Manual Update] Menu on Remote UI
By changing the following service mode, whether or not to permit firmware installation by users can be set.
Set "1" for permitting the firmware installation by users by enabling [Manual Update] menu on the remote UI, and set "0" for not
permitting it.
When it is enabled, [Manual Update] menu is displayed in [Settings/Registration] menu of the remote UI.
COPIER > OPTION > FNC-SW > LOCLFIRM
57
4. Firmware Management