Canon imageRUNNER ADVANCE System V3.13 Service Manual page 61

Work details
Changing the following service mode setting, you can enable the firmware update feature that uses local CDS.
Set it to "1" when enabling the local CDS firmware update feature and set it to "0" when disabling the feature.
When the feature is enabled, the local CDS setting button, [Connection Server Settings], is displayed, which allows to connect
to local CDS and configure the destination server.
COPIER >OPTION >FNC-SW >LCDSFLG
• Example of the Updater screen when the firmware update function using the local CDS is enabled (setting value: "1")
• Example of the Updater screen when the firmware update function using the local CDS is disabled (setting value: "0")
■ Preparations When Using Updater for Use Other Than a through f
● Enabling the [Update Firmware] Button for the [Settings/Registration] Menu
If allowing users to update firmware using Updater, service technicians must first enable the [Update Firmware] button for the
[Settings/Registration] menu.
Set to "1" when enabling the [Update Firmware] button and set to "0" when disabling it.
COPIER > OPTION > FNC-SW > CDS-FIRM
• Example of the Updater screen when the [Update Firmware] button is enabled (setting value: "1")
56
4. Firmware Management