Laser Safety - Garmin LIDAR-Lite v1 Silver Label Operating Manual

Laser Safety
LIDAR­Lite is a laser rangefinder that emits laser radiation. This Laser Product is designated Class 1 during
all procedures of operation. This means that the laser is safe to look at with the unaided eye. However, it is
very advisable to avoid looking into the beam and power the module off when not in use.
No regular maintenance is required for LIDAR­Lite. In the event that the unit becomes damaged or is
inoperable, repair or service of LIDAR­Lite is only to be handled by authorized, factory­trained technicians.
No service of LIDAR­Lite by the user is allowed. Attempting to repair or service the unit on your own can
result in direct exposure to laser radiation and the risk of permanent eye damage. For repair or service
please contact PulsedLight directly for a return authorization.
No user should modify LIDAR­Lite or operate it without its housing or optics. The operation of LIDAR­Lite
without a housing and optics or modification of the housing or optics that exposes the laser source may
result in direct exposure to laser radiation and the risk of permanent eye damage. Removal or modification
of the diffuser in front of the laser optic may result in the risk of permanent eye damage.
Caution – Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure. PulsedLight is not responsible for injuries caused through the
improper use or operation of this product.
LIDAR­Lite v1 "Silver Label" Manual​ , Updated: 08/13/15