Assembling Feeder - Chore-Time Konavi Pullet Feeding System Installation And Operator's Manual

Assembling Feeder

Assembling Feeder
1.Line up and slide the Konavi Breeder Restrictor (Item 1) into the Konavi Breeder Cone (Item 2) as shown.
2.Slide the Cone Skirt (Item 3) over the Feed Cone.
3.Line up the Molded Cutouts in the Chick Excluder (Item 4) with the raised features of the Breeder Cone and
slide them together as shown.
4.Line up the Knobs on the Feeder Pan (Item 5) with the center of the Excluder (Item 4) Hinges and snap in
place as shown.
5.Line up and slide the Cone Skirt (Item 3) over the Feed Cone (Item 2).
6.Line up the grooves in the Excluder with the grooves in the Feed Cone and slide them together.
Snap the Knobs on the Pan
into the Excluder Hinge.
18
2
1
4
4
2
5
Item
1 Konavi Breeder Restrictor
2 Konavi Breeder Cone
3 Cone Skirt
4 Konavi Chick Excluder
5 Konavi Feeder Pan
Figure 16.Feeder Assembly
Konavi® Pullet Feeding System
3
Top View
Description Part No.
57354
56756
57355
57396
57395
MF2514A