Otto Bock 6A53 Instructions For Use Manual page 6

Kennzeichen
Material
Max. Verschiebung [mm]
Max. Körpergewicht [kg]
1 Product description
INFORMATION
Date of last update: 2023-02-21
► Please read this document carefully before using the product
and observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident related to the product to the manu­
facturer and to the relevant authority in your country. This is par­
ticularly important when there is a decline in the health state.
► Please keep this document for your records.
1.1 Design and Function
The 6A53 and 6A54 Sliding Adapters permit the distal components of
the modular prosthesis to be shifted in parallel, regardless of the
angle adjustment by the pyramid adapters. The adjustments can be
made either in the frontal plane (medial or lateral) or in the sagittal
plane (anterior or posterior). The sliding adapters are equipped with
different connections:
Product reference number
6A53
6A54
6
6A53 6A54
Aluminium
20
125
English
Connections
pyramid adapter/pyramid
adapter
pyramid adapter/pyramid receiv­
er
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of
modular connectors. Functionality with components of other manufac­
turers that have compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fit­
tings.
2.2 Area of application
Approved for a body weight of up to 125 kg.
2.3 Environmental conditions
Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative
humidity 20 % to 90 %, no mechanical vibrations or impacts
Allowable environmental conditions
Temperature range: –10 °C to +45 °C (14 °F to 113 °F)
Moisture: relative humidity: 20% to 90%, non-condensing
Unacceptable environmental conditions
Chemicals/liquids: fresh water, salt water, perspiration, urine,
acids, soapsuds, chlorine water
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
2.4 Lifetime
This product was tested by the manufacturer with 3 million load
cycles. Depending on the user's activity level, this corresponds to a
maximum lifetime of 5 years.
3 General safety instructions
CAUTION!