Magma
Remove slot covers and install PCIe cards.
Make sure that all cards are fully seated in their connectors. When correctly seated, there will be a firm resistance
when you pull up gently on the card. To keep the cards in place, secure them in the enclosure with their retaining
screws. After securing the cards verify that they do not touch each other.
Extra Power
Some PCIe cards require extra power. There are four 4-pin Molex AUX power connectors that can be used for
providing extra power to cards. And Two 6-pin + 2 PCIe connectors for GPUs.
Roben 3 | Chapter 2
Hardware Installation
14