Table of Contents
Advertisement
Magma
Verify Link Status on Models: 3PX & 3PS2
Once you have installed the Interface cards correctly and both computer and expansion are running, the next thing
to do is to check the LED Link-up status. Verify the following LEDs on the expansion and host interface cards. Host
Card and Expansion card with proper link established should show up with FIVE solid green LEDs. The Interface card
is plugged into X8 PCIe slot
Onboard Visual Diagnostic Features
Multiple LEDs and Dip switches make debugging and troubleshooting easy. Visible LEDs show the PCIe link width
that each PCIe interface card is operating. Other LEDs for "Loss of Clock", "Reset ON", and "Clock Good" are useful
visual indicators for troubleshooting and verifying the connections without expensive software diagnostic tools.
Roben 3 | Chapter 3
Verify Installation
65
Advertisement
Table of Contents
