3PS (3 Slot iPass Storage – Gen2)
This model comes with 8 storage drive bays that can accommodate eight 2.5" drives.
Part List
Qty
Item
1
Expansion Interface card (Installed)
1
Power Cord
1
Ipass Cable
1
Host Interface card
8
Drive Trays (Installed)
2
SAS Cable (Installed)
32
3mm Centering Screws for Drives (32 quantities)
1 set
Rackmount Kit (Optional). For Roben-3 Rackmount model, see page 53
Controller card and Drives (SATA/ SSD) are not included. We recommend using Areca Controller card or a PCIe
controller card that is supported by Windows Operating system and Apple Mac OS X. And has an Apple Thunderbolt
compatible driver. Use standard 2.5 in SSD or SATA drives.
Roben 3 | Chapter 2
Hardware Installation
Magma
49