–
–
–
Configuring the unit for Expert OTDR
Configuring the Acquisition parameters
You can choose the OTDR acquisition parameters.
1
Once the Setup menu is opened, press Acquisition to configure the Acquisition
parameters.
Figure 22
Acquisition parameters
Laser
The acquisition will be carried out on the wavelength(s) selected (for multiple-wave-
length modules). In case of a multi-wavelength module, select All to perform a measure-
ment for all the wavelengths available (this parameter is only available for modules with
a single OTDR port). The wavelengths available to select depend on the module type.
Acquisition Mode
Select the type of acquisition to be performed:
Manual
Link Description parameters
Project Information parameters
File parameters
The acquisition parameters Pulse / Range / Resolution can be set
by the user.
User Manual
Chapter 3 Expert OTDR function
Configuring the unit for Expert OTDR
Used for the OTDR results saving
700MAN201 Rev. 004
33