Table of Contents
Advertisement
Chapter 2 Utilities
Setting up your instrument
As mentioned in the previous sections, you can set up your instrument in the System Settings
and Tray menus.
Configuring international settings
The International Settings menu is used to select the language, local units of
measurement, and other international settings. There are two ways to select international
settings:
Select a preset country. This automatically configures the international settings as
y
appropriate for the selected country.
Configure each setting individually. If you are not in one of the preset countries, or
y
if the settings aren't appropriate for your situation, you can configure each setting
individually.
After selecting a country or configuring each individual setting, you must reboot the
instrument for the international settings to take effect. The settings will be retained when
you turn your instrument off.
1. Go to the System Settings menu, then select International Settings. The
International Settings menu appears.
2. Optional. Select Country to select a preset country.
Selecting a specific country will automatically change the settings as appropriate
for that country. For example, selecting France will automatically set the language
to Francais, the measurement system to metric (e.g. the unit of distance will be
expressed in meters and the cable size will be expressed in millimeters), and the unit
of temperature to Celsius.
3. If necessary, change the settings for Language, Keyboard, Measurement System,
Temperature Units, Time Zone, and Cable Terminology by doing the following:
Press the menu item that corresponds to the setting.
y
Select the value for the setting from the list.
y
4. Press Back/Cancel to exit the menu.
5. Turn off the power, then turn back on to reboot the instrument.
The international settings are configured and the user interface is localized.
38
ONX-220 User's Guide
22135173, Rev. 000
June 2020
Advertisement
Table of Contents
