Changing The Type Of An Event - Viavi E4123MM User Manual

Chapter 3 Expert OTDR function
Results display
Table View
From the results screen, click on Table to display exclusively the measurement results
in a table.
Figure 41 Table View
The list of all the events detected during acquisition or manually measured are displayed
in a table:
• The events exceeding alarm thresholds are displayed in red, whereas those lying
withing the thresholds are displayed in green.
Select Failed on the button
exceeding the thresholds.

Changing the type of an event

The type of event can be modified, either from Trace, SmartLink or Table view:
1 Maintain pressed the icon to be modified, in the results table.
2 In SmartLink or Table view, in the menu open, select the new type of event to be
applied.
In Trace view; click first on Event Codes, and select the new type of event to be
applied.
62 User Manual
to display exclusively the results
700MAN201 Rev. 004