Principle Of The Smart Test; Selecting Smart Test - Viavi E4123MM User Manual

Chapter 2 SMART TEST function

Principle of the Smart TEST

Principle of the Smart TEST

The Smart TEST is used to perform OTDR acquisitions using a pre-loaded configuration
file (no setup required) and access to essential analysis features.
Smart TEST standard process
1 Select the configuration file, which contains all acquisition parameters and file
storage setup, and which has been created in Expert mode (see
configuration in a file" on page
2 Configure / modify some parameters before starting the test.
3 Start the acquisition (standard or real time)
4 Save the results
Figure 5 Standard Smart TEST Process

Selecting Smart TEST

The Smart TEST function is available for any OTDR module installed on the equipment.
To select this function, after the equipment starts:
1 Press the H
2 Select the Smart TEST icon.
8
Select Smart TEST
Load a test config.
Set basic parameters
START Smart
TEST acquisition
button
OME
User Manual
52).
Read measurement
pass/fail verdict
Save results
700MAN201 Rev. 004
"Saving OTDR