Configuring the Project Information parameters
In the Setup menu, press Project information.
Figure 30
Project Information parameters
NOTE
Refer to the User Manual of the Cable-SLM option for Project configuration
and use.
Technician Id
Click on the text box to enter the name of the operator carrying out the measurement.
Job Id
Click on the text box to enter a description of the measurement to be performed.
Comment
Click on Comment text box to enter a specific comment to the project.
Configuring the Report parameters
The Report storage parameters must be also configured, in order to define how and
where the results will be saved in the file system of the equipment.
1
In the Setup menu, press File.
User Manual
Chapter 3 Expert OTDR function
Configuring the unit for Expert OTDR
700MAN201 Rev. 004
47