Table of Contents
Advertisement
OLP-87/OLP-87P
To display the live view, tap the
J
File toolbar
Saving a picture
It is possible to save the frozen picture from the Digital Probe.
[G]
1.
Press the
key.
2.
Edit the file name.
3.
Tap the
[OK]
button.
File is saved in the preselected group.
Configuring the Digital Probe
1.
Tap the
[Probe]
button.
[A]
2.
Press the
key to configure the Digital Probe according to
the following description.
Brightness settings
1.
Set the luminosity manually using the arrow keys.
– or –
[A]
Tap the key
>
desired value.
2.
Tap the
[OK]
button.
– or –
To confirm, press the center key within the arrow keys.
Test mode
Launching a test of the connector and fiber end-face
See
"Freeze mode" on page 60
commands available.
To launch the test with the predefined profile (see
on page
60):
1.
With the P5000i Digital Probe, use the Focus Control key (see
Fig.
21) to adjust the image quality and sharpness.
[Probe]
[Brightness]
to tune the luminosity to the
for more information on
8 P
/PCM O
ROBE
PERATION
F
ILE TOOLBAR
button.
"Profile"
57
Hide quick links:
Advertisement
Table of Contents
