Figure 9
Acquisition in progress in Smart TEST
At the end of the acquisition, a beep is emitted, and the measurements are displayed, in
SmartLink view, with a dialog box indicating the pass or fail verdict.
NOTE
During acquisition, the traffic on fiber is automatically detected (see
detection" page
Actions on trace during acquisition
During an acquisition, several actions are available on results in progress.
Modifying acquisition parameters (Real Time mode only)
You can modify the acquisition parameters during the acquisi-
tion:
1
Press the
2
Scroll through the possible values of the parameters.
Elapsed
acquisition time
13)
Setup
key.
User Manual
Chapter 2 SMART TEST function
Performing acquisitions in Smart TEST mode
Total acquisition time
700MAN201 Rev. 004
"Traffic
15