Chapter 3 Expert OTDR function
Configuring the unit for Expert OTDR
L
D
INK
ESCRIPTION
R
EPORT
Saving OTDR configuration in a file
Once File and Measurement parameters have been configured, those parameters are
kept in memory and can be saved in a configuration file.
This configuration file can then be recalled and reused in two cases:
•
in order to be applied when acquisition in SmartTEST mode is performed.
•
in order to be recalled for future acquisition in Expert OTDR
To save parameters in a configuration file:
1
If necessary, press Setup to return to Setup menu.
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press menu key
The onscreen keyboard displays
4
Enter a name for the configuration file (max. 20 characters).
NOTE
Configuration file is saved by default in the directory disk/config.
Figure 34
Save Configuration file - Onscreen keyboard
Directory into
which file will be
saved
52
Change Fiber Nr
Filenaming
Cable_Id][Fiber_Num]_[Lambda][Direction]
Auto Store
User Manual
.
700MAN201 Rev. 004
Increment
Auto filenaming
Yes