Showing The Detailed Information Of One Event - Viavi E4123MM User Manual

Figure 12 Event line or Info bar
NOTE
This zone is available whatever is the display: SmartLink, Trace or Table.
• Zone 2: Graphical representation of the link, with icons symbolizing the different
events detected.
• Zone 3: Link Table, which gives a summary of results for each wavelength, with
results within/without thresholds in green/red (according to Alarm thresholds
defined in the setup screen).

Showing the detailed information of one event

The information concerning the event, its type and the alarm thresholds defined for this
event, can be displayed from the SmartLink screen.
1 Select the event for which information must be displayed, on the graphic.
The event is highlighted in purple once selected.
A frame displays, and describes:
– the event type
– the value above which it is on defect
Figure 13 Event Details
User Manual
Chapter 2 SMART TEST function
700MAN201 Rev. 004
Results display
19