Figure 34. Terminate Debug; Figure 35. Debug Main Window - Holtek HT32 Series Quick Start Manual

32-bit ARM ® Cortex TM -M3 MCU
HT32 Series
2. After the debugging has finished, click "Debug → Terminate (Ctrl + F5)" or "Terminate" icon to
exit the debug mode.

Figure 34. Terminate Debug

3. The debug window is shown below. There is information about "Registers", "Disassembly",
"Source Code Window", "Memory", "Variables" and so on.

Figure 35. Debug main window

Rev. 1.00 ��/35 �01��0����