Setting Up The Gcc Compiler; Figure 10. Select Toolchain Path - Holtek HT32 Series Quick Start Manual

32-bit ARM ® Cortex TM -M3 MCU
HT32 Series
4

Setting up the GCC Compiler

Before using the CoIDE to implement a project it is necessary to first configure the GCC compiler
and debugger. The following steps show how to install the compiler.
Step 1. Refer to the CooCox's web site
download the GCC compiler. After downloading, install the software.
Step 2. After launching the CooCox CoIDE, click "Select Toolchain Path" under the Project menu
to open the Select Toolchain Path dialog.
Figure 9. Open The Select Toolchain Path dialog
Step 3. Click the "Browse" button, select the folder which contains the arm-none-eabi-gcc.exe and
the other gcc excute files. Click the "OK" button to complete.

Figure 10. Select Toolchain Path

Rev. 1.00
http://www.coocox.com/CoIDE/Compiler_Settings.html
10/35
to
�01��0����