Download And Debug; Enter/Exit Debug Mode; Figure 33. Start Debug - Holtek HT32 Series Quick Start Manual

32-bit ARM ® Cortex TM -M3 MCU
HT32 Series
9

Download and Debug

The following section shows how to download the application and use debug features such as free
running, break, single step and breakpoint.

Enter/Exit Debug Mode

1. Click "Debug → Debug (Ctrl + F5)" or "Start Debug" icon to enter the debug mode. The image
will be downloaded into Flash memory automatically (when the "Auto Download Before
Debugging" option is enabled).

Figure 33. Start Debug

Rev. 1.00 �7/35 �01��0����