Table of Contents
Advertisement
32-bit ARM
®
Cortex
TM
-M3 MCU
HT32 Series
Setting Project Options
The following section describes how to setup the USB debug adapter and Flash Loader.
Configure the USB Debug Adapter
The following is the method to configure the CoIDE USB debug adapter. This example will use the
e-Link32.
1. Connect the e-Link32 to the PC.
2. Click the Debug Configuration button to open the configuration dialog.
Figure 22. Open the Debug Configuration Dialog
Rev. 1.00
1�/35
�01��0����
Advertisement
Table of Contents
