Table of Contents
Advertisement
32-bit ARM
®
Cortex
TM
-M3 MCU
HT32 Series
Step 5. Setup has finished installing on your computer.
Figure 14. Install e-Link32 USB driver – Completing
Below are the configuration steps for the e-Link32 USB driver.
Step 1. Connect the e-Link32 to the host PC via the USB port.
Step 2. The system will detect a USB device and starts the driver installation procedure.
Step 3. Specify the driver path manually according to the USB debug adapter.
"C:\Program Files\Holtek HT32 Series\e-Link32 USB Driver\" – for e-Link32
Rev. 1.00
13/35
�01��0����
Advertisement
Table of Contents
