32-bit ARM
®
Cortex
TM
-M3 MCU
HT32 Series
Adding a Linked File to the Project
A pre-existing file can be can be added into the project as shown below.
1. Right-Click on a folder, which is the virtual location of the linked file, in the "Project" view to
display the Context Menu and choose "Add Linked File" to add a pre-existing file to The Project.
Figure 29. Adding a Linked File
2. The linked file added in the previous step can be viewed in the "Project" view.
Figure 30. Linked File in the Project view
Rev. 1.00
�5/35
�01��0����