32-bit ARM
®
Cortex
TM
-M3 MCU
HT32 Series
5
Installing the USB Debug Adapter
After the CoIDE has been installed, the e-Link32 debug adapter driver must also be installed. The
following steps show how to install the driver.
Step 1. Get the latest version of the driver from the Holtek website or the Holtek supplied
CD-ROM. The filename is similar to "e-Link32-USB_Driver_vnnn.exe" where "nnn"
represents the version number.
Step 2. Execute the installation program of the driver by double-clicking on "e-Link32-USB_
Driver_vnnn.exe". Press the "Next" button to continue when the screen below appears.
Figure 11. Install e-Link32 USB driver – Welcome
Rev. 1.00
11/35
�01��0����